All of the Thermorail Single Horizontal Bar Heated Towel Rails are able to be plated in custom finishes. This means that you can get your single bar heated towel rails to match in with your tapeware and other bathroom fixtures.
If you have specific finish requirements please contact us on firstname.lastname@example.org or 1300 638 631 with details on the finish required, model of towel rail and quantity required for availability and pricing. The lead-time for the plating in the custom finishes is 4-5weeks from time of order.
Single Bar Rail Models that are available for plating
DSS4 – Square Profile – W450xH40xD100mm
DSS6 – Square Profile – W632xH40xD100mm
DSS8 – Square Profile – W832xH40xD100mm
DSR6 – Round Profile – W632xH63xD100mm
DSR8 – Round Profile – W832xH63xD100mm
DCF7 – Curved Flat Profile – W700xH40xD100mm
DCR7 – Curved Round Profile – W700xH32xD100mm
DSC6 – Square Profile with rounded corners – W640xH40D100mm
How do I control my heated towel rail?
Thermorails are safe to be left running continuously however most times it is preferable to have the ability to control when your heated towel rail is on and off and thus saving you energy. The majority of the range of Thermorails don’t have a switch on the unit but can be very simply wired to a standard switch. Alternatively, you can wire the Thermorail to a timer that can be programmed to turn on and off to suit your lifestyle.
Do 12Volt Thermorails get as warm as standard 240Volt Thermorails?
The 12Volt Thermorail range will get as warm and dry your towels as efficiently as the standard 240Volt Thermorails. This is because the amount of heat output is related to the wattage of the rail rather than the voltage. So, a 12Volt Thermorail will put out the same amount of heat as a 240Volt Thermorail with the same wattage.
Are 12Volt rails more efficient that 240Volt rails?
No, a 12Volt rail will use the same amount of electricity as a 240Volt rail of the same wattage.
Do I require a transformer?
Yes, all the Single Bar Rails are 12Volt rails and therefore need to be wired into a 12Volt transformer. A transformer is supplied with all of the single bars so there is no need to purchase this separately.
Where should the transformer be installed?
The transformer can be installed in the ceiling or the wall cavity no further than two metres from the rails. If mounting in the wall cavity the transformer must be behind a switch plate to enable access and the transformer needs to have ventilation.
How many single bar towel rails can I have in a set?
The number of Single Bar 12Volt Rails that you include in a set is only limited by your imagination. To dry and warm your towels effectively you will need a minimum of 3 rails per set.
Do I need to order a mounting system?
No, the single bar rails have all the parts needed for installation however the mounting system is recommended when installing multiple bars as it makes it easier for the cable management and spacing.