Nero Opal Progressive Shower Mixer Brushed Nickel
Get an EXTRA 20% discount when you use “BFCM20”
Hassle Free Returns
Fast and Reliable Shipping
Secure Checkout
Proudly Australian-Owned
PRODUCT DESCRIPTION
Product Type: Shower Mixer Product SKU: NR252009BN Colour: Brushed Nickel Material: Brass
PRODUCT CODE: YSW2520-09 WELS RATING: N/A WATERMARK LICENSE: WM-060073 TEMPERATURE RATING: MIN 1℃-MAX 75℃ PRESSURE RATING: MIN 150KPa-MAX 500KPa
MAINTENANCE AND CARE:
All surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus based cleaning products, as they are abrasive. Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty.
PACKAGE INCLUDES:
- 1x hand wheel
- 1x body
- 1x install kits
General:
Nero recommends this product is installed by a licensed plumber in compliance with all relevant regional regulations. Do not hydrostatic test the installation with this mixer installed. Damage to the ceramic cartridge may occur. All pipe work must be thoroughly flushed prior to the installation of the mixer. In-line filters must be fitted on both hot and cold supplies to prevent foreign particles damaging the ceramic cartridge. Do not remove the ceramic cartridge from the mixer when installing. After installation all connections must be checked for leaks. All outlets used primarily for personal hygiene shall deliver water at a safe temperature as per regional regulations. This mixer is not recommended for use in uncontrolled heating systems such as wet-backs or solar heating units unless a suitable tempering valve is fitted. If limited water flow is experienced, locate aerator and filter washers and clean away foreign material as required. It is the responsibility of the installer to ensure a waterproof seal is achieved between the product and mounting surface. If in doubt about the re quality of the seal, remove the product and reinstall.DOWNLOAD SPECS SHEET